The Aguti Cup-In B58 is a practical beverage holder for armrests with a minimum height of 45 mm and a maximum width of 58 mm.
The cupholder easily attaches to various armrests in the vehicle. Bottles, cups or cans are always close at hand.
The combination of ceramic-coated metal and black polyamide gives the Cup-In its high-quality and sturdy characteristics.
The Cup-In is suitable for containers with a diameter between 65 and 80 mm and a minimum height of 95 mm.
The Cup-In fits perfectly on armrests of VW T5/T6 seats, but is also suitable for seat armrests of other brands e.g. Mercedes Viano.
The cupholder can be fully disassembled and separately sorted for disposed after use (plastic, metal parts, paper/packaging).
|Titanium C-105 matt
Easy fastening tool-free, with Velcro strap
Beverages readily available by direct fastening to the armrest
High-quality craftsmanship in a combination of coated metal and polyamide
Flexibly usable on different armrest types and for different sized beverages (e.g. standard 0.33l can, 0.5l can, standard 0.7l/0.5l water bottle, 1l Coca-Cola bottle, 12 oz cup or 20 oz cup (with lid)
|max. 58 mm
|PA6 + ceramic-coated metal (3 colours)
|Velcro fastening strap with rubberized inner side
|Rubber spacer to compensate clearances
|Fastening/ Operating instructions (DE/EN/FR/IT)
|1. Thread velcro tape into upper inside bar with rubberized side facing inward and press together.
|2. Carefully place Cup-In on the armrest and wind the strap around it.
|3. Guide velcro strap through rear opening, pull tight and fasten.
|4. Stabilize with the spacers depending on the geometry of the armrest. These can be attached to the bars on the inside.
|5. Insert beverage container