The Aguti Cup-In is a practical beverage holder for armrests with a minimum height of 45 mm and a maximum width of 60 - 75 mm.
The cupholder easily attaches to various armrests in the vehicle. Bottles, cups or cans are always close at hand.
The combination of ceramic-coated metal and black polyamide gives the Cup-In its compact and sturdy characteristics.
The Cup-In is suitable for containers with a diameter between 65 and 80 mm and a minimum height of 95 mm.
The Cup-In fits perfectly on armrests of Aguti seats (e.g. motorhome seats Gis-Liner, Milan, Lounge, Deluxe) but also fits other brands of seat armrests.
The cupholder can be fully disassembled and separately sorted for disposed after use (plastic, metal parts, paper/packaging).
|117788||Bronze C-148 matt|
|117787||Anthrazit C-112 matt|
|115382||Titanium C-105 matt|
Easy fastening tool-free, with Velcro strap
Beverages readily available by direct fastening to the armrest
High-quality craftsmanship in a combination of coated metal and polyamide
Flexibly usable on different armrest types and for different sized beverages (e.g. standard 0.33l can, 0.5l can, standard 0.7l/0.5l water bottle, 1l Coca-Cola bottle, 12 oz cup or 20 oz cup (with lid)
Colours The Cupholder is available in the metal coatings "Titanium", "Anthrazit" and "Bronze"
|Armrest width||max. 75 mm|
|Material||PA6 + ceramic-coated metal (3 colours)|
|Velcro fastening strap|
|Fastening/ Operating instructions (DE/EN/FR/IT)|
|1. Thread velcro strap through the appropriate inside bars with the smooth side up|
|2. Place Cup-In on the armrest and wind the strap around it|
|3. Pull velcro strap tight and fasten|
|4. Insert beverage container|